What aspects should be paid attention to in the process of using flue gas desulfurization and denitrification?

When we use flue gas desulfurization and denitrification, how to preserve the product is a very important aspect, whether in the process of use or in the process of transportation and storage. So, what aspects should we pay attention to in this process? This is a question we are going to introduce to you today, let's take a look at it below.

1. During the transportation of flue gas desulfurization and denitrification technology, attention should be paid to prevent a large amount of vibration and friction caused by mixing with hard substances, so as to reduce the breakage of carbon particles and affect the use.

2. Blistering is strictly prohibited. This product is a porous adsorbent, so it is necessary to prevent water immersion during transportation, storage and use. After water immersion, a large amount of water will fill the pores of the activated carbon, making the activated carbon useless.

3. It should be stored in a cool and dry place to prevent the inner and outer bags of the package from breaking, direct contact with the outside world, absorbing other substances, and reducing the ability to absorb H2S and the use effect.

4. Fire prevention, during storage or transportation, prevent direct contact with fire sources to prevent fire.

5. Prevent tar substances. During production and operation, it is forbidden to bring tar substances into the activated carbon bed, because after the surface of the activated carbon particles is covered with such substances, it will fill the pore channels of the activated carbon and make it useless. Therefore, when the gas enters the front of the activated carbon bed, if it contains tar substances, a tar removal device should be added to ensure the normal use of the activated carbon.

Flue gas desulfurization and denitrification equipment needs to be replaced after a period of use, so how do we determine the replacement time? This is a question we are going to introduce to you today, let's take a look at this question below.

1. Generally, biogas desulfurizers need to be replaced after about one year of use. And pay attention to the frequent feeding and discharging. As for how frequent it is, it depends on the amount of your feeding.

2. Disinfectants, bath water, laundry water, etc. are strictly prohibited from entering the pool.

3. When discharging large quantities, the switch connected to the desulfurization bottle must be turned off, otherwise the air will enter the desulfurization bottle, causing the desulfurizer to heat up, which may burn the desulfurization bottle.

4. Regularly remove stagnant water. When you see the pointer on the pressure gauge jumping up and down, it means that there is water in the pipe. It is more convenient if there is a water bottle.

5. After cooking, remember to turn off your breath.